Home > News > Content

Aluminum Extruder Operation Is Related To What And The Size Of The Profile Is Important

May 25, 2017

 Aluminum Extrusion Aluminum Extruder operation is related to what and the size of the profile is important. The aluminum extruder, which will be the object of the following description, is not only one of the types of extruders, but also an important point, it is also one of the site products and keywords, so it is important Treat, and seriously carry out their learning work, so that there will be a good learning effect, and at the same time, to further understand and understand the different types of extruder.

  1. Aluminum profile extruder models know, can you know the profile size? And, 6063 profiles, the extrusion ratio, is generally controlled in the number of areas?

  Aluminum profile extruder, when you know the specific model, it is possible to know the specific profile size, because the extruder model is different, the corresponding profile size, is not the same. For example, 630 tons of aluminum extrusion machine, which can be squeezed in the diameter of the aluminum rod is 90mm.

  Aluminum Extrusion 6063 profiles, the extrusion ratio, if, from a professional point of view, it is generally in the range of 30 to 150, and is to be strictly controlled.

  2. Is the choice of aluminum extruder, whether or not the profile size is an important aspect?

  The choice of aluminum extrusion machine, which should take into account the factors that are a lot, which is included in the profile size of this one, so on this issue, the answer is yes. And, if there is profile of the relevant drawings, then, is to help this kind of extruder the correct choice.

  3. For the operator, to achieve the correct operation of aluminum extrusion machine, mainly related to several specific aspects?

  Aluminum Extrusion The operator of the equipment, if you want to achieve the correct operation of the aluminum extrusion machine, then it should be from its preparation work, equipment operation and equipment shutdown of these three aspects to achieve the requirements, and then, to achieve The above objectives. And, it can be said that this is also must be done, is not sloppy and out of care.