Aluminum Die Casting is a very important production process. The aluminum alloy liquid is rushed into the mold from bottom to top under a lower gas pressure, and is crystallized and molded under a certain pressure.
Aluminum Die Casting Foundry Products
Aluminum Die Casting is a very important production process. The aluminum alloy liquid is rushed into the mold from bottom to top under a lower gas pressure, and is crystallized and molded under a certain pressure.
Since aluminum and aluminum alloy substrates have poor adhesion to the surface coating film, they must be subjected to surface pretreatment to form a conversion film on the surface. This not only enhances the bonding force of the coating film, but also greatly improves the corrosion resistance.
Products show:
Company Brand | ZP Aluminum |
product name | Aluminum Die Casting Foundry Products |
Drawing available | PDF, STP, DWG, CAD. |
Production Process | Die casting, Deburring, Drilling holes, Tapping, CNC Machining and Assembly |
Surface Treatment | Sand blasting, Tumbling, Powder coating, Wet painting, Painting, Anodizing and Polishing |
Die casting materials | aluminum alloy, A360, A380, A383, AlSi10Mg, AlSi9Cu3, ADC3, ADC6, ADC12, ZL104 and ZL107 |
Advantages:
1. It is possible to manufacture metal parts with complex shapes, clear outlines and thin walls and deep cavities. Since the molten metal maintains high fluidity at high pressure and high speed, it is possible to obtain metal parts that are difficult to process by other processes.
2. Die castings have high dimensional accuracy, up to IT11-13, sometimes up to IT9, surface roughness Ra0.8-3.2um, good interchangeability.
3. High material utilization. Due to the high precision of die castings, they can be assembled and assembled with a small amount of machining, and some die castings can be assembled directly. Its material utilization rate is about 60%--80%, and the blank utilization rate is 90%.
4. High production efficiency. Due to the high-speed filling, the filling time is short, the metal industry solidifies rapidly, and the cycle speed of the die-casting operation is fast. Among various casting processes, the die casting method has the highest productivity and is suitable for mass production.
5. Easy to use inserts. It is easy to set the positioning mechanism on the die-casting mold to facilitate the inlaying of the inserts and meet the special performance requirements of the die-casting parts.
Our factory